Logged offToll free : 1 888 344-4424FR

×

Home - Supplies - DenPlus Products - DenPlus 3D Resins

DenPlus 3D - Dental Model resin

Special prices on bulk purchase: Mix and match

  • $113.95 - per bottle, on purchase of 3 or more 

  • $104.95 - per bottle on purchase of 5 or more 

DenPlus

Product number :

You must logon or create an account to see our prices

Introducing DenPlus’s own dental model resin for 3D printers. Developed according to stringent requirements, this resin provides strength, accuracy and predictability at an affordable price. It can be printed at 50 µm or 100 µm layer thickness and is suitable for all types of dental models. It is compatible with a variety of DLP and LCD printers.

  • Scannable
  • Accurate
  • Hard
  • Tested on DLP and LCD printers
  • Colors: Beige, Gray, White
  • Quantity: 1 kg

Printer validation for our 3D resin is performed in-house to ensure total control and consistency of results. Our methodology involves exhaustive print tests and meticulous fine-tuning of material parameters until reference restorations that include zirconia crowns and bridges as well as cast partial frameworks, fit the 3D printed models the same way they fit on the original stone models from which they originate from.



Consult the Documentation and Videos section below to obtain the settings of validated printers.


Color Beige, Gray, White
Visicosity 220~280 cps @25 °C
Tensile Strength 49-56 MPa
Tensile Modulus 1640-1740 MPa
Flexural Strength 78-83 MPa
Flexural Modulus 2080-2160 MPa
Elongation at break 10-13%
Hardness 85 D

SDS DenPlus3D Dental Model Resin


Validated Printers

The list of printers below covers only those validated directly by DenPlus Inc. To obtain the parameters for one of these printers, please send the request to info@denplus.com.

printers

Asiga Max UV385, Pro4K UV385
(on Composer ver. 1.3.8 or above)

Asiga Max UV385

Shining 3D AccuFab-D1s
(on Accuware 3.2.0.48 or above)

Shining 3D AccuFab-L4D/L4K
(on Accuware 3.2.0.48 or above)

Flashforge Hunter

(on FlashDLPrint 2.3.0 or FlashDental 1.2.3 and above)

Shining 3D AccuFab-D1
(on Accuware 3.2.0.48 or above)

Phrozen Sonic XL 4K 2020

(on Phrozen 3D or Phrozen DS)

Phrozen Sonic XL 4K 2020

Phrozen Sonic 4K, Sonic 4K 2022

(on Phrozen 3D or Phrozen DS)

Phrozen Sonic 4K 2022

Phrozen Sonic XL 4K 2022, XL 4K PLUS

(on Phrozen DS)

Sonic XL 4K PLUS

POST-CURING

  • LED 405nm source (without heat):
      - 30 mW/cm2 (ie: FabCure 1) - 40 minutes per side (80 min. total)
      - 70 mW/cm2  or more (ie: FabCure 2) -  34.5 minutes total

  • OTOFLASH G171: 2000-2400 flashes per side.

Allow models to cool down to room temperature before using them.

NOTICE: Note that the white resin yellows a little after post-curing but turns white again after 24-48 hours.